Bollards
As well as Barriers we supply and install automated bollards. Electromechanical bollards have a post that withdraws flush with the ground.
These can be operated with access control and exited by exit loops, also controlled by an LED traffic light system. Rising bollards are perfect for the areas outside banks, jewellers, exhibition halls and all those places requiring maximum security from ramming.
Specification:
Easy 0115-500
| Supply voltage: | 230 Vac ±10% 50Hz |
| Moves down spontaneously in case of blackout: | No |
| Maximum number of manoeuvres a day: | 500 |
| Moving up time: | 7.0 Seconds |
| Protection level: | IP67 |
| Cylinder Diameter: | 115mm |
| Cylinder Height: | 500mm |
Easy 0200-700
| Supply voltage: | 230 Vac ±10% 50Hz |
| Moves down spontaneously in case of blackout: | No |
| Maximum number of manoeuvres a day: | 500 |
| Moving up time: | 9.0 Seconds |
| Protection level: | IP67 |
| Cylinder Diameter: | 200mm |
| Cylinder Height: | 700mm |
Defender 0273-700
| Supply voltage: | 230 Vac ±10% 50Hz |
| Moves down spontaneously in case of blackout: | Yes |
| Heavy-duty work: | Yes |
| Moving up time: | 9.0 Seconds |
| Protection level: | IP67 |
| Cylinder Diameter: | 273mm |
| Cylinder Height | 700mm |
Dakota
| Supply voltage: | 230 Vac ±10% 50Hz |
| Moves down spontaneously in case of blackout: | No |
| Moving up time: | 6.0 - 9.0 Seconds |
| Protection level: | IP67 |
| Cylinder Diameter: | 210mm |
| Cylinder Height: | 700mm |
Stoppy
| Power Supply: | 230 Vac ±10% 50Hz |
| Moves down spontaneously in case of blackout: | No |
| Moving up time: | 6.0 Seconds |
| Protection level: | IP67 |
| Cylinder Diameter: | 210mm |
| Cylinder Height: | 500mm |
| LED Traffic Lights |
MANUAL KEY OPERATED COLLAPSIBLE BOLLARD
The lockable or key operated post is ideal for reserving individual car parking spaces and can also be used to restrict access to driveways. Only key holders or people who know the lock code (if combination padlock is used) can release the post from its upright position, the post can also be locked in the down position.
These posts are suitable for installation onto concrete. If the road surface were tarmac or block paving, an additional concrete pad would be required.
“Contact us” for a no-obligation site survey.
